Serving Medina, OH · Medina County · ~35 miles from Canton
Self-Leveling Concrete in Medina, OH
Medina has one of the most recognizable town squares in Ohio — a community that takes genuine pride in its appearance and heritage. That pride extends to the homes and businesses that make Medina County one of Northeast Ohio's most desirable places to live and work. Canton Epoxy serves all of Medina with the same 100% solids epoxy systems, diamond-ground preparation, and workmanship-warranted polyaspartic topcoats that have made us the region's most trusted flooring contractor. From Medina Square area homes to Route 18 commercial properties, we bring professional results to every Medina project.
Medina County's clay-rich soils create elevated moisture levels in many concrete slabs — a challenge that makes pre-installation MVER testing especially important for Medina-area projects. We've caught problematic slab moisture on numerous Medina County jobs that would have caused premature delamination if left unaddressed. Our moisture-mitigating primer system resolves elevated slab moisture before any decorative coating is applied, protecting your investment and fulfilling the terms of our lifetime workmanship warranty.
Medina homeowners and Medina County businesses looking for the area's best epoxy installation should call Canton Epoxy at 330.330.9900. We're 35 miles away, we schedule promptly, and we back every job with our lifetime workmanship warranty.
Why Medina Homeowners Choose Us
- Creates the perfectly flat substrate every quality finish floor needs
- Fixes uneven, heaved, settled, or pitted slabs permanently
- Cost-effective alternative to full concrete tear-out and replacement
- Ideal prep for epoxy, LVP, tile, polished concrete, and laminate
- Structurally bonded to the existing slab via mechanical prep + primer
- Fast cure — finish flooring often installed within 24–48 hours
- Professionally placed using calibrated water ratios and grade-control technique
- Available for residential garages, basements, and commercial floors
- Backed by the same professional standards as our epoxy installations
Key Features
Precision-Flat Final Surface
Our self-leveling compound cures to a mirror-flat plane within a small fraction of an inch across the entire slab — the substrate standard required for premium epoxy, tile, or luxury vinyl flooring.
Corrects Uneven, Heaved, Settled Slabs
Fills low spots, flattens high spots, and restores a single uniform plane — critical for homes and commercial spaces with decades of freeze-thaw-driven slab movement.
Fixes Spalled, Pitted, & Damaged Concrete
Surface defects that would telegraph through any finish floor — pitting, spalling, minor crack networks, deteriorated surface layer — are permanently covered by a strong, bonded overlay.
Mechanical Surface Preparation
Shot blasting or diamond grinding removes existing coatings, laitance, and contaminants before the overlay is poured — ensuring a permanent bond between the old slab and the new pour.
Bonding Primer System
A specialty bonding primer is applied across the entire slab before the self-leveler is placed, chemically locking the new overlay to the existing concrete for long-term performance.
Thickness Engineered to the Application
Thickness ranges from 1/8 inch (feather-finish leveling) to 2+ inches (structural overlay), engineered to the specific condition of your slab and the finish floor that will follow.
Fast Cure, Fast Return to Service
Self-leveling overlays cure fast — light foot traffic is typically possible within 4 hours, and finish flooring can often be installed within 24–48 hours depending on thickness and product.
Medina Project Details
How It Works in Medina
Our Installation Process
The same professional process we use on every Medina County project — no shortcuts.
Slab Assessment & Free Estimate
We visit your property, measure the slab, inspect for cracks and structural concerns, confirm the finish flooring you intend to install, and specify the required overlay thickness. Estimate includes transparent itemized pricing.
Mechanical Surface Preparation
Shot blasting or diamond grinding removes existing coatings, laitance, and surface contaminants, opening the concrete profile and creating the clean, sound substrate self-leveling compound requires to bond permanently.
Crack & Joint Treatment
Cracks are routed and filled with semi-rigid polyurea or epoxy filler. Expansion joints are treated per manufacturer spec. Any through-slab penetrations are addressed so they don't telegraph through the overlay.
Bonding Primer Application
A specialty bonding primer is applied across the entire slab, creating the chemical interface that locks the new overlay to the existing concrete for long-term structural bond.
Self-Leveling Compound Pour
The self-leveler is mixed to calibrated water ratios, placed by pump or bucket, spread with experienced spike-roller and gauge-rake technique, and allowed to flow to its designed thickness. Grade control and edge shoring ensure a flawless final plane.
Cure, Inspect, Hand-Off
The overlay cures under controlled conditions. We verify flatness, inspect bond quality at edges, and confirm the slab is ready for its next phase — whether that's our own epoxy system or another contractor's finish flooring.
Use Cases